Contacts Services Home
Links Tabesh Software
 
 

Water up : Projection screen

Among projection screens of fabrics or foils screens made out of water have become more and more popular in the event industry. Wear-resistance and barely visible technical structures are the most important advantages of these systems.Unforgettable events and unique presentations Vertical water screens can be created in two different ways a fountain based water screen is normally used at outdoor events. Under high pressure water runs through nozzles mounted in water basins.Water screens based on waterfall principle are applied at indoor events. A line of fine drops builds a nearly invisible vale of water. The size of these screens is only limited by the room’s dimensions. This enables projections which seem to float free in space. An effect supported by the water curtain’s transparency

door use  Any rectangular format   Also curved format available  Water movement falling top down   Segments in all length up to 4m   Serial lengths are 1,0m / 2,5m / 3,0m and 4,0m   Heights up to 3m realizable   Serial height is 2,5m   Basin width is 0,7 - 0,9m   Nozzle plate made of PVC   Fixing and casing made of aluminums in a natural state or coated   Middle water quantity with 200 nozzle/meter   Quick and easy installation because of optimized components   Water quantity adjustable   Not suitable for projection   Nozzle plate not demountable

Application :

  • Hotels

  • Amusement parks

  • Discotheques

  • Discotheques

  • Theaters

  • Museums

  • Trade shows

  • Billboards

  • Special effects

Size :
 Nozzle Height: 2" (50mm) / 7" (177.8mm) with C-clamps
Nozzle Width: 48" (1.2m)
Nozzle Depth: 2" (50mm) / 7.5" (190.5mm) with Filter

Maximum Screen Height: Usable Height is limited to 40'-50' (12.2m-15.2m) from nozzles
Maximum Screen Width: Width is virtually unlimited

Weight :
Nozzle Dry Weight: 10 lbs (4.5kg)
Nozzle Running Weight: 14 lbs (6.3kg)

Full Screen Dry Weight: Dependant on size
Full Screen Running Weight: Dependant on size
Recycle Basin Weight: Dependant on size

Mounting :
Mounting Orientation: Top down flow
Mounting: C-clamps accepting up to 2" diameter (50mm) Tubing/Trussing

Projection :
 Media: Video, film, slide, laser, gobo/intelligent lighting
Projection Orientation: Rear-Projection only
Projection Angle: Minimum 1:1 or longer throw lens (2:1 or greater preferred)
Lighting Conditions: Lower ambient lighting for best results Ambient Lighting Images

Water :
Water Requirements: Dependant on size

Electrical :
Power Requirements: 110-240 Volts AC

Operation :
Set-Up Time: App. 4 Man/Hrs. per 12' (materials on-site & staged)
Strike Time: App. 4 Man/Hrs. per 12'

Running Time:
Unlimited (auto-level water fill available for continuous-duty evaporation loss)
 Screen is created from 4' (1.2m) modular sections. This allows virtually any width screen to be created by adding more sections.

Management of each center that mentioned above could provide earning money by marvelous capabilities of this system for environmental commercials.

The Water up consists of the following components:

  • Projection: SANYO PLC-MX100 ANSI Lumen 5,000 (XGA)

  • Water Pumpo:p>

  • NNozzle

  • Computer & Cableso:p>

  • Sound System

  • Case Projection

  • One Effect

Examples of pictures
 
 

 
 

Please click to picture and see more videos
 

 

 

 In order to further information and getting answer to your questions please contact with us

Name:
Email:
Comment: