The Water Screen UP is Among projection screens of fabrics or foils screens made out of water have become more and more popular in the event industry. Wear-resistance and barely visible technical structures are the most important advantages of these systems.Unforgettable events and unique presentations Vertical water screens can be created in two different ways a fountain based water screen is normally used at outdoor events. Under high pressure water runs through nozzles mounted in water basins.Water screens based on waterfall principle are applied at indoor events. A line of fine drops builds a nearly invisible vale of water. The size of these screens is only limited by the room’s dimensions. This enables projections which seem to float free in space. An effect supported by the water curtain’s transparency.
door use Any rectangular format Also curved format available Water movement falling top down Segments in all length up to 4m Serial lengths are 1,0m or 2,5m or 3,0m and 4,0m Heights up to 3m realizable Serial height is 2,5m Basin width is 0,7 - 0,9m Nozzle plate made of PVC Fixing and casing made of aluminums in a natural state or coated Middle water quantity with 200 nozzle/meter Quick and easy installation because of optimized components Water quantity adjustable Not suitable for projection Nozzle plate not demountable
Application :
  • Hotels
  • Amusement parks
  • Discotheques
  • Theaters
  • Museums
  • Trade shows
  • Billboards
  • Special effects
  • ...
Size :
  • Nozzle Height: 2" (50mm) / 7" (177.8mm) with C-clamps
  • Nozzle Width: 48" (1.2m)
  • Nozzle Depth: 2" (50mm) / 7.5" (190.5mm) with Filter
Maximum Screen Height: Usable Height is limited to 40'-50' (12.2m-15.2m) from nozzles
Maximum Screen Width: Width is virtually unlimited
Weight :
Nozzle Dry Weight: 10 lbs (4.5kg)
Nozzle Running Weight: 14 lbs (6.3kg)
Full Screen Dry Weight:Dependant on size
Full Screen Running Weight: Dependant on size
Recycle Basin Weight: Dependant on size
Mounting :
Mounting Orientation: Top down flow
Mounting: C-clamps accepting up to 2" diameter (50mm) Tubing/Trussing
Projection :
Media: Video, film, slide, laser, gobo/intelligent lighting
Projection Orientation: Rear-Projection only
Projection Angle: Minimum 1:1 or longer throw lens (2:1 or greater preferred)
Lighting Conditions: Lower ambient lighting for best results Ambient Lighting Images
Water :
Water Requirements: Dependant on size
Electrical :
Power Requirements: 110-240 Volts AC
Operation :
Set-Up Time: App. 4 Man/Hrs. per 12' (materials on-site & staged
Strike Time: App. 4 Man/Hrs. per 12'
Running Time:
Unlimited (auto-level water fill available for continuous-duty evaporation loss)
Screen is created from 4' (1.2m) modular sections. This allows virtually any width screen to be created by adding more sections.
Management of each center that mentioned above could provide earning money by marvelous capabilities of this system for environmental commercials.
The Water up consists of the following components:
  • Projection: SANYO PLC-MX100 ANSI Lumen 5,000 (XGA)
  • Water Pump
  • Nozzle
  • Computer & Cables
  • Sound System
  • Case Projection
  • One Effect

Please click to picture for watching videos :